Milk Clarifiers

REDA centrifuges of RE-P serie are specifically designed to clean raw milk (cow, sheep, goat, etc.) and whey.
These separators are specially built for dairy applications and match very high bowl speeds for the best performances in separation of solid particles with very small diameters (dirty, spores, bacterias, etc).
Standard design of these separators provides the product feeding under pressure by a soft inflow system. Then the product is accellerated to separation speed without damage being caused to any of the fat globules.
The wide working surface, the high spinning speed and the extremely fast sludge expulsion lead to maximum cleaning efficiency.
The clarified product exits under pressure, therefore no recovery pump is necessary.
The range of process capacity goes from minimum 3000 l/h to maximum 35,000 l/h.

 

 

Milk separators

REDA centrifuges of RE-T serie are specifically designed to skim, clean and standardize milk, cream and whey.
These separators are specially built for dairy applications and match very high bowl speeds for the best performances in separation of solid particles with very small diameters (fat, dirty, spores and bacterias, etc).
Standard design of these separators provides the product feeding under pressure by a soft inflow system. Then the product is accellerated to separation speed without damage being caused to any of the fat globules.
The wide working surface, the high spinning speed and the extremely fast sludge expulsion lead to maximum separation and cleaning efficiency.
The skimmed product and cream exit under pressure, therefore no recovery pumps are necessary.
The range of process capacity goes from minimum 1500 l/h to maximum 50,000 l/h.

 

 

 

Bacterias Removal

REDA separators of RE-B serie are specially designed centrifuges used to separate micro-organisms (spores and bacterias) from raw milk.
The benefits of this treatment are various:

  • Improvement of shelf-life of milk on the market.
  • Bacteriological quality improvement of milk used to make cheese, milk and whey powder.
  • Restore of the quality in case of unfavorable milking, logistics or environmental conditions.

During separation of bacterias, milk gets also cleaned from all possible dirt and extraneous parts.
The process of removing micro-organisms can be managed with the standard single phase system (without recirculation) or with the two-phases system (with recirculation).
These centrifuges can be placed before or after a skimming separator but to get the highest separation level of bacterias product temperature should not be below +55°C, so that its natural position is in a pasteurisation or sterilization line. Furthermore removal efficiency of bacterias also depends on the characteristics of the product. 

Standard design of these separators provides the product feeding under pressure by a soft inflow system. Then the product is accellerated to separation speed without any breakdown of the fat globules.
The wide working surface, the high spinning speed and the extremely fast sludge expulsion lead to maximum separation and cleaning efficiency.
The trateated milk exits under pressure, therefore no recovery pump is necessary.
The range of process capacity goes from minimum 3000 l/h to maximum 35,000 l/h.